MS Beams
- MILD STEEL
- > Mild Steel Plates
- > Cold Rolled Steel
- > Boiler Quality Plates
- > Wear Resistant Steel
- > Chequered Steel Plates
- > Galvanized Coil
- STAINLESS STEEL
- > Stainless Steel Plate
- > Hot Rolled Coils
- > Cold Rolled Coils
- STRUCTURAL STEEL
- > MS ANGLE
- > MS Channel
- > MS Beams
- > MS Flat
- HOLLOW SECTIONS & TUBES
- > MS Pipe
- > MS Seamless Pipe
- MILD STEEL
- > Mild Steel Plates
- > Cold Rolled Steel
- > Boiler Quality Plates
- > Wear Resistant Steel
- > Chequered Steel Plates
- > Galvanized Coil
- STAINLESS STEEL
- > Stainless Steel Plate
- > Hot Rolled Coils
- > Cold Rolled Coils
- STRUCTURAL STEEL
- > MS ANGLE
- > MS Channel
- > MS Beams
- > MS Flat
- HOLLOW SECTIONS & TUBES
- > MS Pipe
- > MS Seamless Pipe
![](https://namratasteel.com/wp-content/uploads/2023/09/MS-Beams.webp)
MS Beams
(MS) Beams made up of high-quality raw materials add to the aesthetics of the construction design. Beams are represented by dimensions of Web & Flange and they primarily carry vertical gravitational forces.
I Beam:
I-Beams are steel beams fabricated by milling or rolling steel in an I-shape. It is made of a single piece of metal or aluminum throughout the unit .
H Beam:
H-Beams are steel beams made of rolled steel in the shape of the alphabet “H.” They are fabricated as built-up units. The flanges are welded to the web to form the H-section. H-beams are also called wide flange beams. The web of I-beams is thinner than H-beams. H-beams have greater web thickness compared to I-beams.
UC Beam:
Universal Columns (UC) are the most often used section for structural steel purposes. Due to their section shape, they are often called “I-sections” or “H-sections”. Unlike a universal beam, the UC’s width is roughly equal to its depth.
UB Beam :
UB beam known as Universal Beams , A universal beam is a beam of the same cross-section along its length. In other words, the steel beam has the same dimensions from end to end. The height of the I beam is greater than or equal to its width at any point along its length, whereas a universal column has an equal or greater width than height. The universal column is also known as H section, I section, W section or double T section.
- Sizes – Various Sizes are there as per IS Standard Sections.
- Length – upto 12000 mm Long
- PEB Industry
- Constrution Of Bridges
- Crane Manufacturing .